Skip to content
Reforma en Tenerife
Living room with new floor-to-ceiling black aluminium windows and ocean views (illustrative rendering)
Service · Windows and doors

Windows and doors in Tenerife

Replacing your windows is one of the few renovations you notice the same day – in the noise, the temperature and your electricity bill. On an island with salt air and wind, getting the material right matters more than the price of the frame.

Free site visit and quote anywhere on the island. Reply within 24 working hours, in English.

Guide price in Tenerife

Windows and doors with a thermal break (rotura de puente térmico, RPT) start from €380/m² installed in Tenerife. The final price depends on the material, how they open, the glazing and whether the opening needs rebuilding.

In a coastal home, the choice of material isn’t about looks: salt air attacks hardware and screws, and the wrong frames on the seafront start to stick and jam within a few years.

Guide pricefrom €380/m²
Usual timeframe4–8 weeks
Visit and quoteFree, within 24 h

What this service includes

  • On-site measurement, opening by opening. Nothing is made from drawings without first measuring what’s actually built.
  • Removal of the old windows and doors and waste disposal.
  • Supply and installation of the new windows and doors in uPVC, thermally broken aluminium or timber.
  • Glazing to suit: double or triple, with an air gap, low-emissivity, or solar control on south- and west-facing sides.
  • Perimeter sealing and trims inside and out, which is where the insulation is lost if the job is rushed.
  • Roller shutters, insect screens and locks when they’re part of the project.

What is NOT included

This list matters as much as the first one, and hardly anyone publishes it. Any of these items can be added to the quote: what we don’t want is for them to turn up halfway through the job as a surprise.

  • Major building work if the size of the opening has to change: it can be done, but it’s a separate line item and may change the type of permit needed.
  • Painting the room after installation. The trim is left ready to paint; painting the whole room is quoted separately.
  • Security grilles or alarm systems.
  • Awnings and external shading.
  • Replacing windows on a protected facade without the relevant heritage report. In historic centres there are conditions on material, colour and the layout of panes and panels that have to be resolved before anything is made.
Transparent pricing

How much it costs in Tenerife

The price is given per square metre of opening, but the range is wide because one material can cost twice as much as another for the same opening. These are the reference points:

Guide prices: Windows and doors in Tenerife
ItemGuide priceNote
Windows and doors with a thermal break from €380/m² Installed, with glazing and sealing. That’s the market floor for a sound solution.
uPVC middle of the range Best thermal and acoustic performance for the price. Immune to salt air.
Thermally broken aluminium mid to upper range Slimmer frame, copes with large openings. Watch the hardware on the coast.
Timber top of the range Required on many protected facades. Needs regular maintenance.
Solar control glass extra cost over standard double glazing Highly recommended on south- and west-facing sides.

Indicative ranges, subject to on-site measurement. Prices exclude tax: the Canary Islands charge IGIC (their own indirect tax) instead of VAT, itemised on the quote.

Timeframes

4–8 weeks

Installation for a whole home takes two or three days. What sets the timeframe is manufacturing, which takes four to eight weeks depending on the material and the manufacturer. That’s why windows and doors are the first thing measured and ordered when they’re part of a full renovation: leave them to the end and they’re the item that delays handover.

The process

How we work

We manage the works, and they are carried out by professional tradespeople from the island, chosen by us for each line item. We don’t have a crew on the payroll and would rather say so up front: you sign one contract, speak to one person and we answer for the whole job. We explain it plainly in about us.

  1. Site visitWe come to the property, measure up and check the plumbing and electrics. Free.
  2. Fixed-price quoteWithin 3–5 days: every line item with price, finishes and timeframe.
  3. Permit and scheduleWe handle the permit and line up the trades with no dead time.
  4. Supervised worksProgress updates with photos. Any change is approved before it is made.
  5. HandoverFinal walk-through with you and a closed snagging list.
Corner of a black aluminium sliding window with a thermal break

Which material to choose depending on where your home is

On the seafront – Los Cristianos, Las Américas, Puerto de la Cruz, Radazul, Los Gigantes – the deciding factor is salt air. uPVC is immune to corrosion, so it’s usually the worry-free option. Aluminium works well if the coating and, above all, the hardware are designed for a marine environment; with standard hardware, the mechanisms start to seize up within a few years.

In the northern midlands (the mid-altitude slopes), the problem is a different one: persistent damp and condensation. Here the best insulator wins, and the difference between double glazing and single glazing shows directly in the mould stains around the frames.

On south- and west-facing sides, with strong sun almost all year round, the glass matters more than the frame: solar control glazing noticeably reduces overheating in the room and cuts air-conditioning use.

And in a protected historic centre, the choice isn’t yours alone. In La Laguna, La Orotava, Icod or Garachico there may be conditions on the material, colour and pane layout of windows visible from the street, and that’s resolved before manufacturing, not after.

Signs your windows are no longer up to the job

  • Condensation between the two panes: the sealed unit has failed and no longer insulates.
  • You can feel a draught with the window closed, or dust gets in around the edges.
  • The opening panels rub, are hard to open and close, or the catch doesn’t close properly.
  • You can hear the street clearly with everything shut.
  • Recurring mould on the wall right around the frame.
The whole island

Where we offer this service

Across the whole island of Tenerife. Our office is in Arona, and we work in all four areas: the metropolitan area, the north, the south and the Güímar Valley. The site visit is free in every municipality.

Common questions

Frequently asked questions

The questions we are asked most often on site visits. If yours is not here, ask us directly.

Do uPVC windows have a thermal break?

A thermal break is an insulating barrier inside an aluminium profile, because aluminium conducts heat very well. uPVC barely conducts heat and insulates on its own, so it does not need one. When comparing uPVC windows in Tenerife, look at the glass, the hardware and the sealing.

How much does it cost to replace the windows in a home in Tenerife?

Windows and doors with a thermal break start from €380/m² of opening, installed and glazed. For an average home, the total depends on how many square metres of openings you have, the material and the glazing. We measure each opening at the site visit and the quote is fixed-price.

uPVC or aluminium in the Canary Islands?

On the coast, with salt air, uPVC gives fewer problems in the long run because it doesn’t corrode. Thermally broken aluminium is a great solution if the hardware is designed for a marine environment and the opening is large, because it allows slimmer frames. Away from the coast, the decision is more about design and budget than technical factors. We compare them in depth in our guide to windows and salt air: uPVC, aluminium or timber.

Is it worth replacing just some of the windows?

Yes, if you start with those in the worst condition and on the most exposed side, usually south and west. You gain comfort where it’s most noticeable and spread the investment. What doesn’t make much sense is replacing just one window in a room and leaving the others: the insulation of the whole is set by its weakest point.

Do I need a permit to replace my windows?

If you keep the same opening and don’t change the building’s exterior appearance, a prior notification (comunicación previa) or a minor works permit (obra menor) is usually enough. If you change the size, colour or material in a way that alters the look of the facade, or if you’re in a protected historic centre, the process is more demanding. We check before anything is made.

What if my building’s community rules require uniform windows?

It’s common, especially in buildings from the seventies and in complexes in the south. Many communities of owners have agreed rules on the colour and type of windows visible from outside. We check with the administrator before ordering anything: having to remake a window because it breaks the community’s rules is an avoidable expense.

Plan your renovation

See what yours costs in 3 minutes

Choose what you want to do, the finishes and the style, and the planner gives you the guide price, the timeline and the permit. No details needed.

Plan my renovation

Starts with the windows already selected

Quote

Tell us what you need

We call you within 24 working hours, in English, to arrange the visit. Free and with no commitment.

  • Free site visit anywhere on the island
  • Fixed-price quote, itemised line by line
  • Your details are not passed on to third parties

Prefer to talk? +34 822 263 441

We reply within 24 working hours, in English. No cost, no commitment and your details are never passed on to a list of companies: you hear back from the person who will manage your project.

Shall we put a price on your renovation?

Tell us what you want to do and where on the island. We call you, visit the property and send you a fixed-price quote, itemised line by line. No cost and no commitment.